Installing And Configuring An Ethernet Connection; Figure 4-11 Ethernet Port Connections To Maxpro-Net; Table 4-3 Rj45 Ethernet Pin Assignments - Honeywell ULTRAKEY LITE HJC5000 Installation And User Manual

Installing UltraKey Lite with MAXPRO-Net

Installing and Configuring an Ethernet Connection

Step 1: Connect to the UltraKey Lite Ethernet Port
MAXPRO-Net
56
Baud Rate: 19.2 KB
Data Bit: 7
Parity: Even
Stop Bit: 1
Table 4-3 RJ45 Ethernet Pin Assignments
Port Pin
RJ45 1
Ethernet
2
3
6
1. Plug an RJ45 network cable from the network to the controller Ethernet port. Up to 99
controllers can be connected to the network. See
2. Connect MAXPRO-Net to the network. Refer to the applicable
Installation Guide for instructions.
Figure 4-11 Ethernet Port Connections to MAXPRO-Net
TCP/IP
Signal
TX +
TX –
RX+
RX –
Figure
Ethernet Port
TCP/IP
RJ45 Network cables
Network
TCP/IP
Ethernet Port
4-11.
MAXPRO-Net
Controller 1
Controller 32