Figure 5-1 Software Upgrade Warning Message - Honeywell ULTRAKEY LITE HJC5000 Installation And User Manual

Rebooting UltraKey Lite
Changing the UltraKey Lite Web Browser Password
Document 800-07422 Rev A
08/10
When the process is complete, the message Upgrade success displays and the
system reboots.
WARNING! Do not power off the keyboard during upgrading. Serious
damage can occur to the firmware, rendering the keyboard
inoperable.
Figure 5-1 Software Upgrade Warning Message
1. Log into the web browser.
2. From the top menu, click the System Reboot tab.
The Reboot System window opens.
3. Click Reboot to continue or click another tab or Logout to exit without rebooting.
1. Log into the web browser.
2. In the upper right corner, click Change Password. See
3. In the Old Password field, enter the current password
4. In the New Password field, enter a new password
5. Enter the new password in the Confirm New Password field.
6. Click Apply to set the new password or Cancel to exit without changing it.
Figure 5-2 Change Password Page
UltraKey Lite Controller Installation and User Guide
Figure 5-2.
69