Using the UltraKey Lite Controller
Task
To move back through the menus
one level at a time
To scroll through the top level
menu options
To scroll through the secondary
level menu options
To correct errors
VideoBloX Key Functions
ID
Key Description
2
Alarm
3
Seq
4
Iris –
4
Iris +
5
Set
6
Recycle (Undo)
24
Table 2-1
LCD Menu Navigation During Set Up (cont'd)
Options
•
KEYS: Press Alt > Clr
•
LCD KEYS: Press the right/left arrow keys
•
TOUCH PAD: Rotate your finger clockwise or counter-clockwise
•
TOUCH PAD RING: Press the right / left
•
JOYSTICK: Move right/left
You can use any of these ways to access the LCD:
•
LCD KEYS: Press the up/down arrow keys
•
TOUCH PAD: Rotate your finger clockwise or counter-clockwise
•
TOUCH PAD RING: Press the forward/backward arrows
•
JOYSTICK: Move up/down
•
KEYS: Press Clr
Note
Use
Figure 2-1
to locate each key as labeled in the ID column.
Note
The keyboard supports dynamic key configuration. The key functions listed in
Table 2-2
are all default functions. Contact Honeywell Technical Support or
refer to the applicable VideoBloX manual.
Table 2-2
VideoBloX Key Functions
Function in Camera Mode
Acknowledge Alarms
Selects Sequence mode
Iris close –
Iris Open +
Store a preset (preshot)
Undo previous camera selection
(NetCPU)
arrows
PCK (Cam Mode) PCK (Device Mode)
Alarm Ack
Alarm Ack
SEQ
SEQ
Iris C
Frame <
Iris O
Frame >
Store
Stop
<-
VCR F2