Table of Contents
Advertisement
Installing UltraKey Lite with VideoBloX
Navigating the LCD Configuration Menus
Document 800-07422 Rev A
08/10
In this section:
•
Navigating the LCD Configuration
•
Installing and Configuring a Serial
•
Installing and Configuring an Ethernet
•
(Optional) Configuring UltraKey Lite Using the Web
Note
For all installations, refer to the applicable VideoBloX or VideoBloX Lite
installation or user guides for more information.
This section explains how to connect the UltraKey Lite controller to VideoBloX and how
to enter the basic configuration settings specific to VideoBloX. UltraKey Lite can control
the remote VideoBloX via either the serial port or the Ethernet.
Note
The use of the arrow keys under the LCD is used for the following instructions.
See
Figure
3-1. Also see
on page
22
for detailed instructions for other ways to navigate or
Administration Using the Controller LCD
tree.
Menus, page
31
Connection, page
32
Connection, page
36
Browser, page
Using the UltraKey Lite to Navigate the LCD Menus
on page
65
3
41
System
for a configuration menu
31
Hide quick links:
Advertisement
Table of Contents
