Installing UltraKey Lite with MAXPRO-Net
Navigating the LCD Configuration Menus
Document 800-07422 Rev A
08/10
In this section:
•
Navigating the LCD Configuration
•
Installing and Configuring a Serial
•
Installing and Configuring an Ethernet
•
(Optional) Configuring UltraKey Lite Using the Web
Note
For all installations, refer to the applicable MAXPRO-Net installation or user
guides for more information.
This section explains how to connect the UltraKey Lite controller to MAXPRO-Net and how
to enter the basic configuration settings specific to MAXPRO-Net. For other user
configurations see the index or table of contents.
Note
The use of the arrow keys under the LCD is used for the following instructions.
See
Figure
4-1. Also see
on page
22
for detailed instructions for other ways to navigate or
Administration Using the Controller LCD
tree.
Menus, page
47
Connection, page
49
Connection, page
56
Browser, page
Using the UltraKey Lite to Navigate the LCD Menus
on page
65
4
60
System
for a configuration menu
47