Honeywell RAPID EYE K9696V2 Installation Instructions Manual page 78

Multi-Media Unit: Installation Instructions
Fig. 21. Upgrading a unit in the field.
Fig. 22.
on all PCs. The PCs of View operators do not need Admin.
Fig. 23.
Fig. 24.
the Microsoft Access engine, to test connections to Rapid Eye sites.
Fig. 25.
Fig. 26.
Dial-up Networking.
Fig. 27.
across area codes or when a long distance call is needed to dial-up in a local area
code. This can fool Microsoft Windows' Dial-Up Networking application. You can set
Multi to remedy this.
Fig. 28.
Fig. 29.
Fig. 30.
same one used earlier, as in figure 24 on page 3–4.
Fig. 31.
the Feedback box. It should appear after selecting a site and clicking Maintain.
Fig. 32.
installed is crucial to avoiding confusion during the operation of your video
surveillance system.
Fig. 33.
Fig. 34.
synchronized to your PC's clock.
Fig. 35.
Fig. 36.
"Foucault facility, 232".
Fig. 37.
Fig. 38.
LocalView, an operator can communicate with people at the site.
Fig. 39.
two channels of audio, at one Multi site.
Fig. 40.
Fig. 41.
Fig. 42.
Remove the front cover of the unit beforehand.
Fig. 43.
Fig. 44.
7–4
In organizations where security is a high priority, Admin is not installed
Icon for Admin on the Windows desktop
You can add Rapid Eye site information to an empty Multi db, using
Type the site name of your choice in the Add Site dialog.
The "-> Dialup" in the connection name iappears as you click Use
Dial-up making irregular use of area codes occurs when a local call is used
Adding a pilot connection
View icon
Your database can have the name of your choice, as long as it is the
A connection works when you see the "System operational" message in
Indicating the correct Time Zone in which a Multi-Media unit has been
Different rules for daylight savings time in one time zone.
Time tab indicating that a Multi-Media unit's clock could be
Video tab in Maintenance session: video feed adjustments.
Live video from a camera, renamed to "side entrance", at a site called:
Audio input to Multi-Media unit.
Speaking remotely from a PC running View, or onsite using
Audio tab, set to deliver sound to and from the View operator's PC to
Removing the camera input/output (I/O) connectors.
Handle on mounted hard disk.
Pull to remove a mounted hard disk from a unit; push to insert.
PTZ wiring plan
Video tab: PTZ settings.
2–17
3–1
3–3
3–4
3–5
3–7
3–7
3–8
3–9
3–10
3–11
3–12
3–13
3–15
3–15
3–16
4–1
4–2
4–3
5–2
5–3
5–3
5–4
5–5