Illustrations - Honeywell RAPID EYE K9696V2 Installation Instructions Manual

Table 8 Default Multi network settings
Table 9 Multi-Media Shell commands
Table 10 Default modem settings
Table 11 TCP ports
Table 12 Cabling a PTZ dome
Table 13 PTZ drivers for controllers and domes
Table 14 Sensor hardware
Table 15 Serial port use: restrictions
Table 16 Installation FAQ
Table 17 Recommended maximum length of coaxial cable
7.3

Illustrations

Fig. 1.
Fig. 2.
Fig. 3.
supply used for a unit.
Figure 4.
Microsoft patches are needed for your Windows system, consult the Operator
Software Setup Instructions, part #K5401.
Fig. 5.
Fig. 6.
central database.
Fig. 7.
Fig. 8.
Fig. 9.
Fig. 10.
Fig. 11.
Fig. 12.
Fig. 14.
Fig. 15.
VIDEO INPUTS section), on the back-panel.
Fig. 16.
Fig. 17.
Fig. 18.
Fig. 19.
Fig. 20.
Use the first available "IN" on the Multi back-panel for a camera.
Use standard connectors for network (LAN) or telephone line (TELCO).
Consider also plugging in cameras into the uninterruptible power
To install Admin and View software, run the Multi Admin CD-ROM. If
Shortcut for Admin, on the Windows desktop
The window for logging on can also be used to obtain an empty Multi
From the Admin "Sites" tab, you can add, name, update and delete a site.
Select a network or dial-up connection.
Shortcut for View, on the Windows desktop
Use the same database created earlier, using Admin; see fig. 6 on p. 1–4.
A connection works if you see "System operational" in the Feedback box.
Select a site on the Sites tab, then click Live.
Plugging-in a Multi-Media unit.
Connect each camera to a different camera input (an "IN", in the
Temporary use of a PC onsite.
Wiring diagram of a null modem cable
Naming a connection, using HyperTerminal
Indicating a PC's COM Port, using HyperTerminal
Detail of "TELCO" port, used for dial-up connection.
Illustrations: Find-it
2–14
2–14
2–16
3–9
5–4
5–5
5–8
5–11
6–1
6–3
1–2
1–2
1–3
1–3
1–4
1–4
1–4
1–5
1–5
1–6
1–6
1–7
2–5
2–6
2–11
2–11
2–12
2–12
2–15
7–3