Find-It; Knowledge Base - Honeywell RAPID EYE K9696V2 Installation Instructions Manual

7.1

Knowledge Base

!1 Connect cameras (as many as 16) to the Multi-Media unit
!2 Connect the Multi-Media unit to a network or telephone line
!3 Supplying power to the unit and the cameras
!4 Locate a personal computer (PC) running Multi software
!5 Start Admin to create a Multi database
!6 Log on to a Multi database, or create one using Admin
!7 Using Admin, add a site
!8 Add information about the connection, and save it
!9 To use View
!10 Log on to View
!11 Test the connection; use View to run a Maintenance session
!12 Start a Live session
!13 Road map to field work
!14 To unpack a unit
!15 The power up sequence recommended by Honeywell
!16 The power down sequence
!17 To enable the locking of a LocalView functions
!18 To change a LocalView password
!19 To assign an IP address to a unit using LocalView
!20 To connect a null-modem cable
!21 To setup a terminal program
!22 To use the Multi-Media Shell
!23 To assign an IP address to the Multi-Media unit
!24 To quit the program
!25 To return to the Multi-Media Shell after a time out
!26 To connect the Multi-Media unit to a telephone line jack
!27 To field-test a dial-up connection
!28 To field-test a network connection
!29 To deal with a damaged Multi-Media unit

7 Find-it

1-2
1-2
1-3
1-3
1-4
1-4
1-4
1-5
1-5
1-6
1-6
1-7
2-1
2-1
2-5
2-5
2-8
2-9
2-10
2-11
2-11
2-13
2-13
2-14
2-15
2-15
2-16
2-16
2-16
7-1