Walk-Through; Overview - Honeywell RAPID EYE K9696V2 Installation Instructions Manual

1.1

Overview

New to Multi-Media?
Installers who are new to Multi can benefit most from section 1.2: a walk-through of the
key steps of a Rapid Eye Multi-Media unit installation.
Not new to Multi-Media?
Experienced installers can skip to sections:
Software
The software operations for running a quick pilot are in section 3: Checking for Video,
p. 3–1. For information about installing software and the Microsoft Windows patches
needed to run Multi software, consult the Operator Software Setup Instructions for Rapid
Eye Multi-Media units, part #K5401, in your documentation set.
LocalView and View software
A Multi-Media unit can be operated:
Finding out more
To quickly locate

1 Walk-through

2: Field Work, shows procedures and reference material for Multi-Media unit
installation.
5: Other Site Hardware, shows optional hardware that you can add to a Rapid
Eye site.
without a computer (PC), using LocalView. Connect a VGA monitor and
mouse to the unit.
with a PC, using View and Admin software. For information about installing
software and Microsoft Windows patches needed to run Multi software, consult
the Operator Software Setup Instructions for Rapid Eye Multi-Media and Multi-
Media LT units, available as a PDF after the installation of View and Admin on a
PC.
frequently asked questions (FAQs), see section 6, on p. 6–1
procedures (!), tables or illustrations, there are handy Find-its in section 7,
starting on p. 7–1
the index, see p. 15.
1–1