To Make A Record Of A Dial-Up Connection - Honeywell RAPID EYE K9696V2 Installation Instructions Manual

Multi-Media Unit: Installation Instructions
Dealing with connections
Indicate which of the two basic connections you will use to test your Multi-Media unit:
Confirmation
You network administrator can confirm that networked Multi-Media units can be reached
by PING. For dial-up, verify that the telephone line and modem are working. See 2.9:
Field Testing a Connection, on p. 2–16.
3.2.4 Record of a Dial-up Connection

!36 To make a record of a dial-up connection

1.
2.
3.
For a dial-up only connection, leave the IP Address box empty.
An IP address is typed in a dial-up connection only if a RAS server is part of the
connection.
4.
5.
To access an outside line.
If your telephone exchange needs a prefix (an extra telephone key stroke such as a
"9" or an "8"), set it in the Window's Telephony program used by the PC, not in Admin.
6.
3–6
a dial-up connection
a network connection
Click in the "Connections to the Site" pane. The Add Connection dialog is
displayed. The Connection Name box appends a stylized arrow and "Network"
to the site's name.
Click Use Dial-up Networking.
Admin automatically names the connection in the Connection Name box.
Leave the Country Code to "(dialing same country)", unless the Multi-Media
unit is in a different country than the View operator planning to use the site.
Type the unit's Area Code and Telephone Number.
Click Save and Close. The Sites tab is displayed. In the tab's Primary
Connection column, the first letter of "dial-up" appears in parentheses: (d),
followed by the telephone number used to connect to the Multi video unit.