Table of Contents
Advertisement
Solutions
Rev 1.00
This appendix describes some system malfunctions that may occur from time to time
and provides possible solutions.
If this happens ...
The front panel POWER
LED is not lit.
The HRTL-One does not
work when I press any
button.
The HRTL-One is not
recording video.
You see the message
HDD Not Found. Please
Insert HDD and Press
Any Key
.
The Record Enable is not
working.
There is no live video.
The REC LED is on but the
HRTL-One is not recording.
Try this ...
•
Check the power source cable connections.
•
Confirm there is power at the outlet.
•
Check the Key Lock mode (press MENU and
ENTER at the same time).
Check that the hard drive has been properly
installed.
For more information, see
page 4.
Check that the hard drive has been properly
installed.
Check that the Record Enable is set to Yes.
•
Check the camera video cable and connections.
•
Check the monitor video cable and
connections.
•
Confirm that the camera has power.
•
Check the camera lens setting.
When the HRTL-One is in Timer mode, it will only
record during the assigned times.
For more information, see
Video, page 37.
43
A
Installing the Hard
Drive,
Recording Timer Scheduled
Document 900.0259
10/04
Advertisement
Table of Contents
