Recording Video Triggered By An External Device - Honeywell HRTL-One User Manual

Operation

Recording Video Triggered by an External Device

Rev 1.00
The OSD looks similar to the following:
2002 - JAN-01 01:02:03
A
You can program the HRTL-One to record from an external device (see Pin 6 on
Table 2-2). This external device trigger causes the HRTL-One to immediately start
recording, at the recording speed and video quality configured for Record mode (see
Recording Setup, page 26).
The OSD looks similar to the following:
2002 - JAN-01 01:02:03
E
Legend
OW
A = Alarm trigger
= Recording
OW = HDD overwrite
= 32GB. If the OW shows 32GB,
Legend
OW
E = External trigger record
= Recording
OW = HDD overwrite
= 32GB. If the OW shows 32GB,
36
it means that the hard drive
has 32 GB capacity left
for storing recorded video.
it means that the hard drive
has 32 GB capacity left
for storing recorded video.
Document 900.0259
10/04