Clearing The Data On The Hard Drive; Resetting To System Defaults; Figure 3-4 Clear Hard Drive Screen - Honeywell HRTL-One User Manual

Clearing the Data on the Hard Drive

Resetting to System Defaults

Rev 1.00
5. If you have completed all your system configuration changes, press Menu again to
exit and close menu setup.
Caution Clearing the data on the hard drive results in permanent, irreversible loss of
all video and other information currently stored on the hard drive.
To remove all the data from the hard drive:
On the System screen (Main Menu ➤ System), press
1.
HDD, then press Enter.
2. Press or to choose:
Yes = Clear the hard drive.
No = Do not clear the hard drive at this time.
When you select Yes, the following screen displays:
Figure 3-4 Clear Hard Drive Screen
All Data in HDD
Will be Cleared
Are You Sure?
( : No : Yes)
3. Press to clear the hard drive or
4. Press Menu to exit this screen and confirm the current operation.
5. If you have completed all your system configuration changes, press Menu again to
exit and close menu setup.
To reset the system to the factory default settings:
On the System screen (Main Menu ➤ System), press
1.
Reset, then press Enter.
HRTL-One Digital Video Recorder User Guide
to abort the clear process.
23
or to select Clear
or to select System
Document 900.0259
10/04