Table of Contents
Advertisement
System Setup
Recording Setup
Rev 1.00
Yes = Timed recording is activated.
No = Timed recording is not activated.
9.
Press Menu to confirm your change.
10. If you have completed all your system configuration changes, press Menu again to
exit and close menu setup.
Note
Do not overlap timers. If timers overlap, the HRTL-One stops recording at
the end of the first timer interval.
Use the Record screen to set:
•
Image per second (IPS) ratio
•
Record quality
•
Recording format
1.
On the Main Menu screen, press
following screen appears:
Figure 3-7
Record Screen
(Menu)
Timer
Record
Alarm
Remote
System
Event
2.
Press
or
to select the Record IPS (images per second) field, then press
Enter.
Press
or
to choose from the following options:
NTSC = 1, 2, 4, 8, 15, 30, 60
OR
PAL = 1, 2, 3, 6, 12, 25, 50
or
to select Record, then press Enter. The
Record IPS: 60
Record Quality: Normal
Record Mode: Frame
26
(Record)
Document 900.0259
10/04
Advertisement
Table of Contents
