Rear Panel Connections; Figure 2-6 Rear Panel Connections - Honeywell HRTL-One User Manual

Installation

Rear Panel Connections

VIDEO IN
POWER
VIDEO OUT
Rev 1.00
Figure 2-6 shows the rear panel connections and
Figure 2-6 Rear Panel Connections
ALARM
Table 2-2 Rear Panel Connections to Peripheral Equipment
Connection Description
1. Video In Connect to video source (for example, a quad, multiplexer, or
camera).
2. Video Out Connect to a monitor if there is no quad or multiplexer in your
system (see
Connect to the video input of a quad or multiplexer, as shown
in Figure
3. External • RS-232 / RS-485 front panel command line interface
I/O
• Multiplexer synchronization
• Disk full indication
• Record enable/disable
• Video loss indication
• Alarm input/output
4. Power Connect to power cable.
Table 2-2
Figure 2-4).
2-5.
Controlled remotely by an external device or control
system (see Figure 2-4).
10
describes the connections.
Document 900.0259
10/04