Installing The Hard Drive - Honeywell HRTL-One User Manual

Installation

Installing the Hard Drive

Active-handle
New HD Carrier
Rev 1.00
Caution The HRTL-One must be powered off before installing a new hard disk drive
or removing an existing hard disk drive.
Do not remove the hard drive until after the HRTL-One has been powered
down for at least 60 seconds. This will protect the hard drive from possible
damage.
The hard drive must be installed before the HRTL-One can record video. For a list of
compatible hard drives, see
To install the hard drive:
1. Pull the active-handle outwards, then insert the miniature key (supplied in the hard
drive cartridge) into the key hole, turning the key counter-clockwise to the "power
off" (unlocked) position.
Hard drive cartridge
New HD Carrier
Keyhole
2. Pull the handle towards you to remove the carrier body away from the HRTL-One
chassis.
Appendix B.
PAUSE / Up
HDD HDD Full ALARM TIMER PLAY REC
REW FF
Right
Left
MENU ENTER SEARCH SLOW
STOP / Down
Active-handle
HRTL-One chassis
Original HD Carrier
4
REC
POWER
Original HD Carrier
Key
Cartridge frame
Carrier body
Document 900.0259
10/04