Wand Emulation; Wand Emulation Connection - Honeywell 2020 User Manual

Wand Emulation

Wand Emulation Connection

The Wand Emulation Connection barcodes should be used if you want to
change the terminal ID only , without changing any other image scanner set-
tings. We recommend using Wand Emulation Plug & Play barcodes to program
your image scanner to emulate a wand reader. The Wand Emulation Plug &
Play barcodes change other parameters, in addition to changing the terminal
ID. Please refer to Wand Emulation Plug & Play on page 1-22 for further infor-
mation.
In Wand Emulation mode, the image scanner decodes the barcode then sends
data in the same format as a wand scanner. The Code 39 Format converts all
symbologies to Code 39.
The Same Code Format transmits UPC, EAN, Code 128 and Interleaved 2 of 5
without any changes, but converts all other symbologies to Code 39. 2D sym-
bologies are converted to Code 128.
The Code 39 Format barcode below sets the terminal ID to 61, and the Same
Code Format barcode sets the terminal ID to 64.
Code 39 Format
Same Code Format
2 - 14