Using The Image Scanner With Bluetooth Devices; Changing Bluetooth Pin Code; Out-Of-Range Alarm; Duration - Honeywell 2020 User Manual

Using the Image Scanner with Bluetooth Devices

The 3820/3820i image scanner may be used either with the 2020 base or with
other Bluetooth devices. Scanning the Non-Base Bluetooth Connection bar-
code below allows the image scanner to be used with other Bluetooth devices
(e.g., PDA, PC - Bluetooth USB Adapter). After you scan the barcode below,
follow the instructions supplied with your Bluetooth device to locate the image
scanner and connect to it. If you go out of range with your image scanner, the
image scanner automatically reconnects to the Bluetooth device. If you want to
relink to the 2020 base, refer to
"Resetting the Standard Product Default Settings: All Application Work
or
Groups" on page 1-11 .
Note: The multiple work groups option is not available when you are using the
imager with Bluetooth devices other than the 2020 base.

Changing Bluetooth PIN Code

Some devices require a PIN code as part of the Bluetooth security features.
Your image scanner's default PIN is 1234, which you may need to enter the first
time you connect to your PDA or PC. The PIN code must be between 1 and 16
characters. To change the PIN, scan the barcode below and then scan the
appropriate numeric barcodes from the
cover of this manual. Scan Save to save your selection.
Note: Refer to Minimizing Bluetooth/ISM Band Network Activity
page B-1 for additional Bluetooth/ISM information.

Out-of-Range Alarm

Duration

If your image scanner is out range of the base, an alarm sounds from both your
base and image scanner. To activate the alarm options for the image scanner
or the base and to set the alarm duration, scan the appropriate barcode below
1 - 12
"Override Locked Image Scanner"
Non-Base BT Connection
Programming Chart
Bluetooth PIN
on page 1-6
inside the back
beginning on