Wand Emulation Transmission Rate
The transmission rate is limited by the terminal's ability to receive data without
dropping characters. Default = 25 inches/second.
120
200
Wand Emulation Polarity
The Polarity can be sent as standard with black bars high, or reversed with
white bars high. Default = Black High.
* Black High
Wand Emulation Idle
The idle describes the state of the image scanner when no data is being trans-
mitted. When in Wand Emulation mode, you must set the image scanner's idle
state to match the idle state for the device to which the image scanner is con-
nected. Default = Idle High .
* Idle High
10
40
* 25
80
150
White High
Idle Low
2 - 15