UPC E0 and UPC E1 Addenda Separator
When this feature is on, there is a space between the data from the barcode
and the data from the addenda. When turned off, there is no space.
Default = On.
* On
UPC E0 Check Digit
Check Digit specifies whether the check digit should be transmitted at the end
of the scanned data or not. Default = On.
* On
UPC E0 Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it. Default = On.
* On
6 - 22
Off
Off
Off