Connections (continued)
DC Power Connector
The DC power input connector is located on the DCS-2100+ Internet Camera's
back panel and is labeled 12VDC with a single socket to supply power to the
Internet Camera.
I/O Connector
The DCS-2100+ provides a terminal block with two pairs of connectors situated
on the back panel. One pair is for input and the other is for output. The I/O
connectors provide the physical interface to send and receive digital signals to
a variety of external alarm devices. Please refer to the Appendix (Page 93)
in this manual for detailed information.
Bottom Panel
Socket for stand
Attachment socket for the Camera Stand
Located on the bottom panel of the Internet Camera, the socket is used to con-
nect the camera stand to the Internet Camera by attaching the screw head on
the camera stand to the Internet Camera.
Power LED
LED
stands for Light-Emitting Diode.
The Power LED is positioned to the right of the Internet Camera lens. As soon
as the power adapter is connected to the Internet camera the power LED will
flash
red
and
green
several times, the DCS-2100+ is conducting a self-test.
Upon passing the self-test the LED will turn
green
to indicate a good connection
to an Ethernet port or
red
to indicate no connection has been made.
7