Hardware Overview
DC Power Connector
The DC Power input connector is
labeled DC 5V with a single jack socket
to supply power to the DCS-2120.
Ethernet Cable Connector
The DCS-2120 features an RJ-45 connector for connections to 10Base-T
Ethernet cabling or 100Base-TX Fast Ethernet cabling. The port supports the
NWay protocol, allowing the DCS-2120 to automatically detect or negotiate the
transmission speed of the network.
Reset Button
Reset is initiated when the reset button is pressed
once and the Power LED begins to flash. Factory
Reset will be initiated when the reset button is
pressed continuously for 30 seconds. Release
the reset button and the Power LED will begin to
flash, indicating that the DCS-2120's settings are
restored to factory settings.
D-Link DCS-10 Quick Install Guide