Using And Configuring The Dcs-2100+ With A Nat Router - D-Link DCS-2100+ Manual

Enhanced 2.4 ghz wireless internet camera
Hide thumbs Also See for DCS-2100+:
Table of Contents

Advertisement

Using & Configuring the DCS-2100+
with a NAT Router
D-Link's DCS-2100+ is a versatile and cost effective Internet Camera offering
both video and audio monitoring. It can also serve as a powerful surveillance
system in security applications. The DCS-2100+ can be used with any wired
or 802.11b wireless router. This section explains how to view the camera from
either the Internet or from inside your internal network.
Materials Needed:
1 DCS-2100+ Internet Camera
1 Ethernet Cable
A Wired or Wireless router such as the D-Link DI-614+ Wireless Router
Ethernet based PC for system configuration
SETTING UP THE DCS-2100+ FOR USE BEHIND A ROUTER
Installing a DCS-2100+ Internet Camera on your network is an easy 4–step
procedure:
" " " " " Assign a local IP Address to your Internet Camera
# # # # # View the Internet Camera Using Your Internet Explorer Web browser
$ $ $ $ $ Access the Router on Your Web browser
% % % % % Open Virtual Server Ports for Your Router (Enable Remote Viewing)
This section is designed to walk you through the setup process for installing
your camera behind a router and enable remote video viewing. For the basic
setup of the DCS-2100+, follow the steps outlined in the Quick Installation
Guide.
After you have completed the setup of the DCS-2100+ outlined in the Quick
Installation Guide you will have an operating camera that has an assigned IP
Address. Because you are using a router to share the Internet with one or
more PCs, the IP Address assigned to the Internet Camera will be a local IP
Address. This allows viewing within your Local Area Network (LAN) until the
router is configured to allow remote viewing of the camera over the Internet.
" " " " "
Assign a Local IP Address for Your Camera
Run the IP Installer program from the CD included with the DCS-2100+.
Follow the steps in the Quick Installation Guide to configure the
DCS-2100+. The camera will be assigned a local IP Address that allows it
to be recognized by the router. Write down this IP Address for future
reference.
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents