D-Link DCS-2100+ Manual page 66

Using IP Surveillance Software (continued)
The layout of the scheduler tool is divided into 9 sections. For ease of use,
you may skip to section 7. In section 7, when you input the date, hour and
minute, the times you have selected will appear in the Hour, Day, Week and
Month time-lines (sections 1,2,3 and 4 illustrated here.)
Section 1 of the scheduler tool is the Hour time-line. When you input the hour in
section 7 it will be illustrated in section 1. Alternately, you can enter the scheduling
hour in this timeline although it may be a less efficient method of inputting the
information. You can refer to the Schedule With Time Lines section in the following
pages.
Section 2 is the
time-line. When you
schedule the day in
section 7, the result is
displayed here.
Section 3 is the
.
Week time-line
Section 4 is the
Month time-line.
Section 5 is the Current
year selector. Choose
the year here that will be
displayed in Section 7.
Section 6 is the
camera selection and
editing area it provides
the IP addresses and
location information for
your reference. There is
an editing schedule
space for saving a
temporary schedule.
This will be explained in
further detail on the
following pages.
Day
1
2
3
4
6
5
Section 7
time selector, End time
selector, Period selector,
Addition button, and Erase
button. These components
help you choose a period of
time in which to add or delete
records in the schedule
Section 9
operation buttons. These
will be explained in the
following pages.
9
consists of Begin
.
contains the
66
7
8
Section 8 is the
Time Period
selector. Select the
period of time at
which the settings
will apply. The Add
and Erase buttons
are also in this
section. A detailed
explanation of these
features can be
found in the
following pages.