D-Link DCS-2100+ Manual page 80

Using IP Surveillance Software (continued)
Playback Program (continued)
Stop
When you want to stop the displaying video sequence, you can click on
the Stop button. Once you have pressed the Stop button, the start point
will be reset to the start of the present period.
Pause
The Pause button provides you a way to pause the displaying video
sequence. When the displaying video is paused, clicking on the Pause
button again will continue the video to display.
Step Forward
This button is only valid when the displaying video sequence is paused. It
will display the next frame in that period when you click on the Step
Forward button one time.
Fast Play and Slow Play
The DCS-2100+ supports up to 16X fast forward play and slow forward play.
If you want to change the playing speed, move the speed indicator. To increase
playing speed, move the indicator in the clockwise direction. And to decrease
playing speed, move it in the counterclockwise direction. The current speed
you set will be shown in the second column of status area.
Display Adjustment Toolbox
Using the Display Adjustment Toolbox, you can change the displaying video
sequence to the size you want to see in the normal display mode when you
move the area selection indicator to the display area. Below is the Display
Adjustment Toolbox and its own three elements, i.e. Zoom In, Zoom Out,
and Full Screen.
Zoom In
When you click on the Zoom In button one time, the image size in the display
area will be magnified 12.5 percent to the original size. The maximum zoom-
in ratio 2.25:1 for NTSC modulation mode and 1.875:1 for PAL modulation
mode. If you want to see the image in more detail, you can use the full
screen function in the same toolbox.
80