ECC Configuration
ECC Configuration
DRAM ECC Enable
Chipkill ECC Mode
DRAM ADDRESS PARITY Enable
DRAM ECC Enable [Disabled]
Allows you to enable or disable the DRAM ECC.
Configuration options: [Disabled] [Enabled]
Chipkill ECC Mode [Disabled]
Enables or disables the Chipkill ECC mode.
Configuration options: [Disabled] [Enabled]
DRAM ADDRESS PARITY Enable [Disabled]
Enables or disables the DRAM address parity.
Configuration options: [Disabled] [Enabled]
NUMA Function [Enabled]
Enables or disables the building of ACPI SRAT Table.
Configuration options: [Enabled] [Disabled]
IOMMU Mode [Disabled]
Allows you to set GART size in systems without AGP, or disable altogether.
Some operating systems require valid GART for proper operation. If AGP is
present, select appropriate option to ensure proper AGP operation.
Configuration options: [AGP Present] [Disabled] [32MB] [64MB] [128MB]
[256MB] [512MB] [1G]
4-22
[Enabled]
[Disabled]
[Disabled]
DRAM ECC allows
hardware to report
and correct memory
errors automatically
maintaining system
integrity.
Chapter 4: BIOS setup