ECC Configuration
Advanced
Advanced
ECC Configuration
CPU Bridge Chipset Configuration
CPU REVISION
ECC Mode
Current CSI Frequency
Current Memory Frequency
DRAM ECC Enable
DRAM SCRUB REDIRECT
CSI Links Speed
4-Bit ECC Mode
CSI Frequency
DRAM BG Scrub
Data Cache BG Scrub
Memory Frequency
L2 Cache BG Scrub
Memory Mode
L3 Cache BG Scrub
Demand Scrubbing
Patrol Scrubbing
Throttling - Closed Loop
Throttling - Open Loop
ECC Mode [Basic]
Allows you to set the level of ECC protection.
Configuration options: [Disabled] [Basic] [Good] [Super] [Max] [User]
The following items become user-configurable when you set ECC Mode to [User].
DRAM ECC Enable [Enabled]
DRAM ECC allows hardware to report and correct memory errors automatically and
maintains the system integrity. This item becomes configurable when you set ECC
Mode to [User]. Configuration options: [Disabled] [Enabled]
DRAM SCRUB REDIRECT [Disabled]
DRAM SCRUB REDIRECT allows the system to correct DRAM ECC errors
immediately when errors occur, even when the background scrubbing is on.
Configuration options: [Disabled] [Enabled]
4-Bit ECC Mode [Enabled]
Allows you to enable or disable the 4-Bit ECC Mode.
Configuration options: [Disabled] [Enabled]
DRAM BG Scrub [Disabled]
DRAM scrubbing corrects the memory errors when the memory is being used and
improves performance when the memory is not being used.
Configuration options: [Disabled] [40ns] [80ns] [160ns] [320ns] [640ns] [1.28us]
[2.56us] [5.12us] [10.2us] [20.5us] [41.0us] [81.9us] [163.8us] [327.7us] [655.4us]
[1.31ms] [2.62ms] [5.24ms] [10.49ms] [20.97ms] [42.00ms] [84.00ms]
Data Cache BG Scrub [Disabled]
Allows the L1 Data Cache ram to be corrected while idle.
Configuration options: [Disabled] [40ns] [80ns] [160ns] [320ns] [640ns] [1.28us]
[2.56us] [5.12us] [10.2us] [20.5us] [41.0us] [81.9us] [163.8us] [327.7us] [655.4us]
[1.31ms] [2.62ms] [5.24ms] [10.49ms] [20.97ms] [42.00ms] [84.00ms]
4-20
:B0
[Basic]
:6.400GT
[Enabled]
:1066 Mhz
[Disabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
BIOS SETUP UTILITY
[Full-Speed]
[Auto]
[Auto]
[Independent]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
To transition the CSI
links to full-speed
Set the level of ECC
or leave them in
protection. Note:
slow-mode.
The 'Super' ECC mode
dynamically sets
the DRAM scrub rate
so all of memory is
scrubbed in 8 hours.
Select Screen
Select Screen
←→
←→
Select Item
Select Item
↑↓
↑↓
+-
+-
Change Option
Change Option
F1
F1
General Help
General Help
F10
F10
Save and Exit
Save and Exit
ESC
ESC
Exit
Exit
Chapter 4: BIOS setup