Table of Contents
Advertisement
4.
Gigabit LAN2 controller setting (3-pin LAN2_EN1)
This jumper allows you to enable or disable the onboard Broadcom
BCM5721 Gigabit LAN2 controller. Set to pins 1-2 to activate the
Gigabit LAN feature.
KFN4-DRE LAN_EN2 Setting
5.
USB device wake-up (3-pin USBPW12, USBPW23)
Set these jumpers to +5V to wake up the computer from S1 sleep
mode (CPU stopped, DRAM refreshed, system running in low power
mode) using the connected USB devices. Set to +5VSB to wake up
from S4 and S5 sleep modes (no power to CPU, DRAM).
KFN4-DRE USB device Wake up
ASUS KFN4-DRE
LAN_EN2
1 2
2 3
Disabled
Enabled
(Default)
USBPW23
USBPW12
2 3
1 2
+5V
+5VSB
(Default)
®
2-19
Advertisement
Table of Contents
