Table of Contents
Advertisement
2.
Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
KFN4-DRE Keyboard Power Setting
3.
Gigabit LAN1 controller setting (3-pin LAN1_EN1)
This jumper allows you to enable or disable the onboard Broadcom
BCM5721 Gigabit LAN1 controller. Set to pins 1-2 to activate the
Gigabit LAN feature.
KFN4-DRE LAN_EN1 Setting
2-18
KBPWR1
1 2
2 3
+5V
+5VSB
(Default)
LAN_EN1
1 2
2 3
Disabled
Enabled
(Default)
Chapter 2: Hardware information
®
Advertisement
Table of Contents
