Table of Contents
Advertisement
5.2.4
Rebuilding a RAID set
To rebuild a RAID set:
1.
From the Array List, use the up or down arrow keys to select the RAID
set you want to rebuild, then press <Enter>. The RAID set details
appear.
No
No
[Ctrl-X]Exit [↑↓]Select [B]Set Boot [N]New Array [ENTER]Detail
2.
Press <R>.
3.
Use the up or down arrow keys to select a the RAID set you want to
rebuild, then press <F7>. A confirmation message appears.
RAID Mode: Mirroring
Striping Width: 1
Adapt Channel M/S Index Disk Model Name Capacity
2
1
1
0
4.
Press <Enter> to start rebuilding the array,
or <Esc> to cancel. The Array List screen
displays the RAID set after rebuilding.
ASUS KFN4-DRE
Media Shield Utility
- Array List -
Boot
Id
Status
4
Healthy
NVIDIA
3
Healthy
NVIDIA
Array 1 : NVIDIA MIRROR
- Array Detail -
Striping Block: 64K
Master
0
Master
1
[↑↓] Select [F6] Back [F7] Finish
Vendor
Array Model Name
STRIPING
XXX.XXG
MIRRORING XXX.XXG
XXX.XXG
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXX.XXGB
XXX.XXGB
Rebuild array?
[Enter] OK [Esc] Cancel
5-7
Advertisement
Table of Contents
