Table of Contents
Advertisement
4.4.4
USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press <Enter> to display the configuration options.
Advanced
USB Configuration
USB Devices Enabled:
None
USB Controller Support
Legacy USB Support
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
V00.00 (C)Copyright 1985-2004, American Megatrends, Inc.
The USB Devices Enabled item shows the auto-detected values. If no
USB device is detected, the USB Devices Enabled item shows None.
USB Controller Support [USB 1.1+USB 2.0]
Sets or disables the USB controller support.
Configuration options: [Disabled] [USB 1.1 Only] [USB 1.1+USB 2.0]
Legacy USB Support [Enabled]
Allows you to enable or disable support for legacy USB devices. Setting
to [Auto] allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If no USB
device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [HiSpeed ] [FullSpeed ]
BIOS EHCI Hand-Off [Enabled]
Enables or disables the BIOS EHCI hand-off support.
Configuration options: [Disabled] [Enabled]
ASUS KFN4-DRE
BIOS SETUP UTILITY
[USB 1.1+USB 2.0]
[Enabled]
[HiSpeed]
[Enabled]
→←
Select Screen
↑↓
Select Item
+-
Change Field
Tab
Select Field
F1
General Help
F10 Save and Exit
ESC Exit
4-25
Advertisement
Table of Contents
