Table of Contents
Advertisement
10. Power Supply SMBus connector (5-pin PSUSMB1)
This connector allows you to connect SMBus (System Management
Bus) to the power supply unit to read PSU information. Devices
communicate with an SMBus host and/or other SMBus devices using
the SMBus interface.
KFN4-DRE Power Supply SMBus Connector
11. Parallel port connector (26-1 pin LPT1)
This connector is for a parallel port. Connect the parallel port module
cable to this connector, then install the module to a slot opening at
the back of the system chassis.
KFN4-DRE Parallel Port Connector
2-28
PSUSMB1
LPT1
1
Chapter 2: Hardware information
Advertisement
Table of Contents
