Serial Ata Connectors (7-Pin Sata1, Sata2, Sata3, Sata); Backplane Smbus Connector (6-1 Pin Bpsmb) - Asus KFN4-DRE Manual

3. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4)
Supported by the NVIDIA
the Serial ATA signal cables for Serial ATA hard disk drives that allows
up to 3Gb/s of data transfer rate.
If you installed Serial ATA hard disk drives, you can create a RAID 0,
RAID 1, RAID 1+0, RAID 5, or JBOD configuration.
KFN4-DRE SATA Connectors
Important notes on Serial ATA
The actual data transfer rate depends on the speed of Serial ATA hard
disks installed.
4. Backplane SMBus connector (6-1 pin BPSMB1)
This connector allows you to connect SMBus (System Management
Bus) devices. Devices communicate with an SMBus host and /or other
SMBus devices using the SMBus interface.
KFN4-DRE SMBus Connector
2-24
nForce4™ chipset, these connectors are for
®
SATA2
GND
RSATA_RXN2
RSATA_RXP2
GND
RSATA_TXN2
RSATA_TXP2
GND
1
Chapter 2: Hardware information
SATA1 SATA4
GND GND
RSATA_RXN1 RSATA_RXN4
RSATA_RXP1 RSATA_RXP4
GND
GND
RSATA_TXN4
RSATA_TXN1
RSATA_TXP4
RSATA_TXP1
GND
GND
BPSMB1
SATA3
GND
RSATA_RXN3
RSATA_RXP3
GND
RSATA_TXN3
RSATA_TXP3
GND