Rebuilding A Raid Set - Asus K8N-LR User Manual

5.2.5

Rebuilding a RAID set

To rebuild a RAID set:
1. From the Array List, use the up or down arrow keys to select the RAID
set you want to rebuild, then press <Enter>. The RAID set details
appear.
[Ctrl-X]Exit
2. Press <R>.
3. Use the up or down arrow keys to select a the RAID set you want to
rebuild, then press <F7>. A confirmation message appears.
RAID Mode: Striping
Striping Width: 1
Adapt
2
1
4. Press <Enter> to start rebuilding the array,
or <Esc> to cancel. The Array List screen
displays the RAID set after rebuilding.
5-8
NVIDIA RAID Utility
- Array List -
Boot Id Status
No 4 Healthy
No 3 Healthy
[↑↓]Select [B]Set Boot
Array 1 : NVIDIA MIRROR
- Array Detail -
Channel M/S Index
1 Master 0
0 Master 1
[↑↓] Select [F6] Back
Oct 5 2004
Vendor Array Model Name
NVIDIA STRIPING
NVIDIA MIRRORING XXX.XXG
[N]New Array
XXX.XXG
Striping Block: 64K
Disk Model Name
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
[F7] Finish
Chapter 5: RAID configuration
XXX.XXG
[ENTER]Detail
Capacity
XXX.XXGB
XXX.XXGB
Rebuild array?
[Enter] OK [Esc] Cancel