Thermal Plates - Cisco 3200 Series Hardware Reference Manual

Table 1-5
Table 1-5
Indication
Green steady
Red steady
Green blink
Amber blink
Black (no light)

Thermal Plates

Cisco 3200 Rugged Enclosures use thermal plates and Wedge Loks to transfer heat from the cards to the
extrusion.
internal fans.
Figure 1-11
1
1
3
Cisco 3200 Series Router Hardware Reference
1-20
shows the status of the LEDs when the WMIC is in operational mode.
WMIC Operational Mode
Status LED
At least one bridge is associated.
Loading firmware.
No bridges are associated.
General warning.
—
Figure 1-11 shows a card with thermal plates. The conduction cooling removes the need for
Router Card with Thermal Plates
2
3
Power connector
ISA bus
Radio LED
—
Firmware failure.
Transmitting or receiving packets on
the radio port.
Maximum retries or buffer full.
Default.
4
2
Wedge Lok
4
PCI bus
Chapter 1 Cisco 3200 Rugged Enclosures
OL-5816-10