Cisco 3200 Series Hardware Reference Manual page 99

Chapter 7 Managing Firmware and Configurations
Command
Step 3 archive download-sw /overwrite /reload
tftp:[[//location]/directory]/image-name
Step 4 archive download-sw /leave-old-sw /reload
tftp:[[//location]/directory]/image-name
To avoid an unsuccessful download, use the archive download-sw /safe command, which downloads
Note
the image first and does not delete the current running version until the download succeeds.
The download algorithm verifies that the image is appropriate for the WMIC model and that enough
DRAM is present, or it aborts the process and reports an error. If you specify the /overwrite option, the
download algorithm removes the existing image on the flash device whether or not it is the same as the
new one, downloads the new image, and then reloads the software.
If the flash device has sufficient space to hold two images and you want to overwrite one of these images
Note
with the same version, you must specify the /overwrite option.
If you specify the /leave-old-sw, the existing files are not removed. If there is not enough space to install
the new image and keep the current running image, the download process stops, and an error message is
displayed.
The algorithm installs the downloaded image on the system board flash device (flash:). The image is
placed into a new directory named with the software version string, and the system boot path variable is
updated to point to the newly installed image.
If you kept the old image during the download process (you specified the /leave-old-sw keyword), you
can remove it by entering the delete /force /recursive filesystem:/file-url privileged EXEC command.
For filesystem, use flash: for the system board flash device. For file-url, enter the directory name of the
old image. All the files in the directory and the directory are removed.
OL-5816-10
Purpose
Downloads the image file from the TFTP server to the WMIC, and
overwrite the current image.
• The /overwrite option overwrites the software image in flash
with the downloaded image.
The /reload option reloads the system after downloading the
•
image unless the configuration has been changed and not
saved.
• For location, specify the IP address of the TFTP server.
For directory/image-name, specify the directory (optional) and
•
the image to download. Directory and image names are case
sensitive.
Downloads the image file from the TFTP server to the WMIC, and
keep the current image.
The /leave-old-sw option keeps the old software version after
•
a download.
• The /reload option reloads the system after downloading the
image unless the configuration has been changed and not
saved.
For location, specify the IP address of the TFTP server.
•
For directory/image-name, specify the directory (optional) and
•
the image to download. Directory and image names are case
sensitive.
Cisco 3200 Series Router Hardware Reference
Working with Software Images
7-21