Cisco 3230 Router I/O End Cap - Cisco 3200 Series Hardware Reference Manual

Cisco 3230 Router I/O End Cap

Figure 1-8
connect power and data cables.
Figure 1-8
7
8
1
3
5
7
9
11 Power input
The connectors are sealed at the factory with captive dust covers (not shown) that seal the ports and
Note
protect the pins. The dust covers should be used to seal the ports when the ports are not otherwise
covered by cable connectors.
Cisco 3200 Series Router Hardware Reference
1-12
shows the Cisco 3230 Router I/O end cap. It has multiple connectors that can be used to
Cisco 3230 Router End Cap
4 1 5 2
9
WMIC 1 console port
WMIC 3 console port
FE1X port
AUX port
Ser0 RS-232 (DCE) port
6 3
10 11
2 WMIC 2 console port
4 FE0 port
6 FE2X or MARC FE0X port (for more
information, see the
Cabling for the Cisco 3250 and Cisco 3230
Routers" section on page
8 Router console port
10 Ser1 RS-232 (DCE) port
Chapter 1 Cisco 3200 Rugged Enclosures
"Fast Ethernet Port
1-16.)
OL-5816-10