Cisco 3200 Series Hardware Reference Manual page 102

Working with Software Images
Beginning in privileged EXEC mode, follow Steps 1 through 7 to download a new image from an FTP
server and overwrite the existing image. To keep the current image, skip Step 7.
Command
Step 1
Step 2
Step 3
configure terminal
Step 4 ip ftp username username
Step 5 ip ftp password password
Step 6 end
Cisco 3200 Series Router Hardware Reference
7-24
Chapter 7
Purpose
Verify that the FTP server is properly configured by referring
to the "Preparing to Download or Upload an Image File by
Using FTP" section on page
Log in to the WMIC through a Telnet session.
Enters global configuration mode.
This step is required only if you override the default remote
username or password (see Steps 4, 5, and 6).
(Optional) Changes the default remote username.
(Optional) Changes the default password.
Returns to privileged EXEC mode.
Managing Firmware and Configurations
7-22.
OL-5816-10