Chapter 7
Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Select Status > Network Statistics.
Step 4
To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the Clear softkey.
To exit the Network Statistics screen, press the Back
Table 7-3
Item
Tx Frames
Tx Broadcasts
Tx Unicast
Rx Frames
Rx Broadcasts
Rx Unicast
Neighbor Device ID
Restart Cause—One of the
following values:
Hardware Reset (Power-on reset)
Software Reset (memory controller
also reset)
Software Reset (memory controller
not reset)
Watchdog Reset
Unknown
Port 1
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
Network Statistics Message Information for the Cisco Unified IP Phone 6900 Series
Description
Number of packets sent by the phone
Number of broadcast packets sent by the phone
Total number of unicast packets transmitted by the phone
Number of packets received by the phone
Number of broadcast packets received by the phone
Total number of unicast packets received by the phone
Identifier of a device connected to this port discovered by CDP
protocol.
Cause of the last reset of the phone
Link state and connection of the PC port (for example,
100 Mb Full-Duplex
state and has auto-negotiated a full-duplex, 100-Mbps
connection)
softkey.
means that the PC port is in a link-up
Status Menu
Auto
7-7