7.
Note: If any of the cam lock marks (see
Figure 24) do not fall between the "V" marks
when the cam lock is tight, you must adjust
the offending camlock stud as discussed in
Camlock Stud Installation.
8.
When using this lathe,
securely
clamp
workpiece and remove the
chuck
wrench!
Thrown
objects from a lathe can
cause serious injury or
death to the operator and
to bystanders.
your
Figure 24
Camlock Stud Installation
1.
2.
3.
Figure 24
Initial Adjustment:
Cam Lock Positioning:
Figure 24
Figure 24