I
NSTALLATION
C
I
(I
ABLE
NSTALLATION
OCIA
8.
Connect AC power to the transformer. If the AC outlet is equipped with an on/off switch, turn the power on.
9.
Turn on the host system.
10. Configure the StratosH to match the host system's OCIA parameters.
Refer to the MetroSelect Configuration Guide (
Parameters.
xxx* Specifies international connection. See page 3 for a complete listing of power supply options and their part numbers.
**
See page 3 for information on optional display types and part numbers.
See power source caution statement on page 9 of this manual.
24
S
)
NTERFACE
PECIFIC
Figure 23. OCIA Cable Installation Schematic
00-02407x) under Section I: OCIA for Enabling and Setting OCIA
PN