Placing A Three-Way Conference Call - Cisco SPA 303 User Manual

Using Basic Phone Functions

Placing a Three-Way Conference Call

Placing a Three-Way Conference Call
STEP 1
STEP 2
STEP 3
NOTE
Cisco Small Business IP Phone SPA 303 User Guide (SIP)
To initiate a conference call:
During an active call, press the conf softkey. The first call is placed on hold, a second line is
opened, and you hear a dial tone.
Dial the second person's telephone number.
When the second person answers, press the conf softkey again. All three parties are connected
in the conference call. (You can cancel the conference by pressing the EndCall softkey before
connecting the calls, then press the Resume softkey to resume the original call.)
When you hang up, the other two parties are disconnected.
3
34