Table of Contents
Advertisement
If the router does not connect to the Internet:
Review your settings. Make sure that you have selected the correct options and typed
1.
everything correctly.
Contact your ISP to verify that you have the correct configuration information.
2.
Read
3.
Chapter 10,
contact NETGEAR technical support.
Use NETGEAR genie After Installation
When you first set up your router, NETGEAR genie automatically starts when you launch an
Internet browser on a computer that is connected to the router. If you want to view or change
settings for the router, you can use genie again.
Launch your browser from a computer or wireless device that is connected to the router.
1.
Type http://www.routerlogin.net or http://www.routerlogin.com.
2.
A login window displays.
Enter admin for the router user name and password for the router password, both in
3.
lowercase letters.
Note:
The router user name and password are different from the user name
and password for logging in to your Internet connection. For more information,
see
Types of Logins and Access
Upgrade the Firmware
When you set up your router and connect to the Internet, the router automatically checks to
see if newer firmware is available. If it is, a message is displayed on the top of the screen.
To upgrade the firmware:
Click the message that tells you new firmware is available.
1.
During the firmware upgrade, you cannot access the Internet.
Click Yes to upgrade the router with the latest firmware.
2.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the
upgrade. For example, do not close the browser, click a link, or
load a new page. Do not turn off the router.
After the upgrade, the router restarts.
For more information, see
R7000 Smart WiFi Router
Troubleshooting. If problems persist, register your NETGEAR product and
on page 14.
Upgrade the Router Firmware
Getting Started
on page 81
16
Advertisement
Table of Contents
