Set Up A Repeater Unit; Port Forwarding And Triggering; Remote Computer Access Basics - NETGEAR WNR612v3 User Manual

Set Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the
wireless connection to the base station.
If you are using the WNR612v3 base station with a non- router as
Note:
the repeater, you might need to change additional configuration
settings. In particular, you should disable the DHCP server function
on the wireless repeater AP.

To configure the router as a repeater unit:
Log in to the router that will be the repeater. Select Basic > Wireless Settings and
1.
verify that the wireless settings match the base unit exactly. The wireless security option
has to be set to WEP or None.
Select Advanced > Wireless Repeating Function
2.
Select the Enable Wireless Repeating Function check box
3.
Select the Wireless Repeater radio button.
4.
Fill in the Repeater IP Address field. This IP address has to be in the same subnet as the
5.
base station, but different from the LAN IP address of the base station.
Click Apply to save your changes.
6.
Verify connectivity across the LANs.
7.
A computer on any wireless or wired LAN segment of the router should be able to
connect to the Internet or share files and printers with any other wireless or wired
computer or server connected to the other access point.

Port Forwarding and Triggering

By default, the router blocks inbound traffic from the Internet to your computers except replies
to your outbound traffic. You might need to create exceptions to this rule for these purposes:
To allow remote computers on the Internet to access a server on your local network.
•
To allow certain applications and games to work correctly when your router does not
•
recognize their replies.
Your router provides two features for creating these exceptions: port forwarding and port
triggering. The next sections provide background information to help you understand how
port forwarding and port triggering work, and the differences between the two.

Remote Computer Access Basics

When a computer on your network needs to access a computer on the Internet, your
computer sends your router a message that contains the source and destination address and
N150 2-Port Wireless Router WNR612v3
Advanced Settings
65