Chapter 4
Tools Menu
The Tools menu displays the options described in
Option
Description
Display and
Opens the
Control
monitor and manage your server. The Display and Control window is described on
Configuration
Starts the Endurance Configuration Utility. Refer to
Utility
Utility's online help for information. This option is only available on IOPs.
Endurance
Starts MTCLOG, an MS-DOS based Endurance event viewer that displays events as they
Event Utility
occur. Refer to
Windows NT
Displays a submenu that starts any of the following Windows NT utilities, described in the
Utilities
Windows NT documentation:
• Control Panel
• Disk Administrator
• Event Viewer
• Explorer
• File Manager
• Notepad
• Performance Monitor
• Registry Editor
Note: Some of these options may not be enabled if you are monitoring a remote server.
Options
Displays the
monitoring parameters for the server.
Save Settings
Saves all Endurance Manager window settings currently in use (including the location of
Now
Endurance Manager window(s) on the screen) as the default. For example, use this option if
you changed Endurance Manager setting or parameters and want to save the new settings as
the default.
68
Table 4-11 Tools Menu Options
Display and Control
Window. This dialog box enables you to execute commands to
Chapter 7
for MTCLOG information.
Options Window (page
Table
4-11.
Chapter 6
or the Endurance Configuration
64). This dialog box enables you to set polling and
Endurance Manager
page
61.