Remove Devices - HP NetServer AA 4000 Administrator's Manual

Chapter 6
Add Devices
To add a hardware device:
Step Action
1 Click on the icon for the device you want to
add.
2 Click Add.
3 Follow the on-screen instructions.
4 Complete your configuration changes
following the steps in
Configuration Changes
173.

Remove Devices

To remove an existing hardware device:
Step Action
1 Click on the device that you want to
remove.
2 Click Remove
3 Complete your configuration changes
following the steps in
Configuration Changes
Notes
For example, it might be CDROM Drives.
If you need additional information, use the online
help.
Commit
section on page
Notes
For example, it might be CE.CDROM1.
If you are removing a device so that you can
redefine its properties, after you complete this step,
select Commit, and then add the device again
following the instructions in
171.
Commit
on page 173.
Configuration Utility
Add Devices on page
171