Chapter 5
IOP Enable Operation
This command enables the specified IOP that was disabled or faulted. The IOP attempts to
rejoin the server immediately or when it reboots Windows NT.
Command
IOPn Enable Operation From IOPx
Console Syntax MTCCONS IOPn Enable Operation From IOPx
n – the ID number of the IOP (1 or 2) you want to enable
Variables
x – the ID number of the IOP (1 or 2) that issues the enable command
Results
To verify that IOPn has been enabled, either:
•
•
See Also
IOP Disable Operation
IOP Shutdown Operation
IOPn.Monitor Show Configuration
94
Issue an IOP Show Configuration command from either IOP.
Check the Windows NT Event Viewer on the CE (or on the IOP that you
enabled) for a message that indicates that the IOP is enabled.
Commands