Chapter 6
Using the Endurance Configuration Utility
Using this window, you can:
•
Display Device Properties
•
Add Devices
•
Remove Devices
•
Designate a Boot Disk
•
Commit Configuration Changes
Warning: The configuration information must be identical on both IOPs.
Display Device Properties
To display the properties of an existing hardware device:
Step
Action
1
Click on the device.
2
Click Properties.
170
If you add or remove any hardware devices from your
configuration, you must make the same change on each IOP.
Notes
For example, it might be CE.Disk0.
The Properties dialog box displays the information
for the device. Refer to the online help for specific
device property information.
Configuration Utility