Verify The L2Vpn Is Up And Running And Ce1 Can Reach Ce2, Vice Versa; Multi-Segment Pseudowire - Cisco ASR 903 Manual

Ethernet over MPLS
CE1 Configuration
interface GigabitEthernet0/1/1
ip address 192.168.13.1 255.255.255.248
CE2 Configuration
interface GigabitEthernet0/1/1
ip address 192.168.13.2 255.255.255.248

Verify the L2VPN is up and running and CE1 can reach CE2, vice versa.

ASR903-PE2# show mpls l2transport vc
Local intf
-------------
Gi0/1/0
CE1# ping 192.168.13.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.13.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms

Multi-segment Pseudowire

Multi-segment pseudowire extends the pseudo wire into multiple autonomous systems. In the case below, PW
between PE1 and PE2 have two segments.
OL-30526-01
Local circuit
-------------------------- --------------- ---------- ----------
Ethernet:1
Figure 9. Multi-segment Pseudowire
Dest address VC ID
10.10.3.3 100
Cisco ASR 903 Router Design and Deployment Guide▄
Multi-segment Pseudowire ▀
Status
UP
59