Verifying The Configuration - Cisco ASR 903 Manual

Layer 2 Solution
no ip address
negotiation auto
service instance 10 ethernet
encapsulation dot1q 10
rewrite ingress tag pop 1 symmetric
bridge-domain 10
!
service instance 11 ethernet
encapsulation dot1q 11
rewrite ingress tag pop 1 symmetric
bridge-domain 11
!
interface BDI10
ip address 172.16.10.2 255.255.255.0
!
interface BDI11
ip address 172.16.11.2 255.255.255.0

Verifying the Configuration

Router# ping 172.16.10.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms
Router# ping 172.16.11.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.11.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms
Router# show bridge-domain 30
Bridge-domain 30 (2 ports in all)
State: UP
Aging-Timer: 300 second(s)
Maximum address limit: 256000
GigabitEthernet0/1/0 service instance 10
GigabitEthernet0/1/2 service instance 1
Nile Mac Address Entries
BD mac addr
----------------------------------------------------------------------------------
30 c8f9.f98d.103f
30 c8f9.f98d.503f
OL-30526-01
Mac learning: Enabled
type ports
DYNAMIC Gi0/1/2.tefp1
DYNAMIC Gi0/1/0.Efp10
Ethernet Virtual Circuit using Trunk EFP ▀
Cisco ASR 903 Router Design and Deployment Guide▄
15